Water-Soluble Ink For Lift-Ground Etching

Item number: ASL1000

Sugar-lift ground for etching plates

Category: Stop out Varnish | Hard ground

Amount

starting from $ 15,98
$ 15,98 per 100 ml

including16% VAT., plus shipping

Available now!

There are variations of this item. Please select the variation you wish.


Description

Reservage Lift Ground Lacquer ASL1000

Water-soluble ink for use in the lift-ground technique, also called sugar-lift in gravure printing for making a printing plate on copper, steel or zinc.

Suitable both for subtle work with a fine brush and for etchings with a painterly effect with a free stroke and a wide brush.

Application:

Apply the drawing with a brush, let it dry in the air or with the help of a hair dryer and paint over it with highly diluted asphalt varnish.

Afterwards, the lift-ground coating can be rinsed away with running water and the plate can be etched after applying an aquatint or directly.

Technical data:

  • Colour: light blue
  • Diluent: Water
  • drying time at 20 degrees Celsius: 30-45 minutes

Contents:100,00 ml